After 15 years in Highett we have moved to Seaford! -  4/2 Apsley Pl, Seaford VIC 3198

Search

    Aquatic Creations Melbourne

    Seachem Amguard 250ml, Helps remove ammonia in aquarium water

    Description

    AmGuard™ safely, rapidly and efficiently removes toxic free ammonia. It is safe to use during tank cycling and is ideal for treating emergency situations. AmGuard™ is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesn’t degrade for nearly forty-eight hours. That’s nearly twice as long as our competitors’ products. Unlike competing products, AmGuard™converts it into a safe, non-toxic form that is readily removed by the tank’s biofilter. It does not alter pH. Ammonia can exist in two forms: free and ionized. It is only the free form that is toxic. Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12–14; at this pH AmGuard™ cannot function and thus a false positive reading will result. For long term ammonia control, use Seachem Stability an Matrix. Use Ammonia Alert or Ammonia test to directly monitor levels of free ammonia. AmGuard™ also removes chlorine and chloramines.

    Directions

    Use 1 capful (5 mL) for every 200 L (50 US gallons) daily or as needed to reduce ammonia.

    ADVANCED: If you have an Ammonia Alert that is reading “Alert”, then use 1 capful (5 mL) for every 400 L (100 gallons) daily. If it reads “Alarm”, then use 1 capful for every 200 L (50 gallons) daily. If it reads “Toxic”, then use 1 capful for every 80 L (20 gallons) daily.

    EXPERT: If using our Ammonia test kit, use 1 capful (5 mL) for every 40 L (10 gallons) to remove 1 mg/L (ppm) of free ammonia. Alternatively you may employ the following formula for a variety of ammonia and water levels: 0.125AV=m (for volume in liters) or 0.5AV=m (for volume in gallons). A=ammonia concentration in mg/L, V=the volume of water being treated and m=the volume of AmGuard™ to use in mL. For example, to remove 1 mg/L of ammonia in 100 gallons you would use 0.5*1*100=50 mL.

    If water temperature is above 30 °C (86 °F) do not use.

    Sizes

    100 mL, 250 mL, 500 mL

    This is for the 250ml bottle, others sizes are available either in store or by request.